FREE DELIVERY ON ORDERS OVER £50 IN THE UK & EU

FC36MV (400v) Dual Mode Firing Board c/w DIN housing

SKU A34428-DIN Category

Three phase Dual Mode Firing circuit

£390.00 ex. VAT

Description

Power Supplies

  • Half and Fully controlled Rectifiers
  • AC Motor Control
  • DC Motor Control
  • Soft Starters
  • Heater Controllers
  • Induction Generator
  • AC Voltage Regulation
  • Three Phase Transformer Control

 

Additional Firing boards can be configured to trigger paralleled SCR’s for very high current applications or to provide a twelve pulse driver for smooth DC control

Optional Extras

Din rail housing (W30105)

Commander module (A402131)

Signal conditioning board (A402086)

Thyristor modules,fuses & complete assemblies.

KEY FEATURES
Thyristors require a high initial gate current pulse and comparatively wide sustaining pulses to ensure reliable firing, particularly at small phase control angles. The FC36MV provides the following firing specifications

  • Gate Drive: Picket Fence with a PRF of 25Khz

 

an initial firing pulse of; 10 volts open circuit. 750 mA into 10 Ohm, and sustaining pulses 400mA into 10 Ohm per output. The sustaining pulses are 20 uS Wide.

  • High output initial triggering pulses
  • Gate isolation to 3500 V rms.
  • Adjustable Soft start and soft start times
  • Selectable hard start and hard stop
  • 50/60 Hz operation auto selection
  • Remote Logic input for control in noisy environment 5-24 V dc
  • 3 analogue control inputs 0-5V, 0-10V dc and 4-20mA
  • Current control input 0-5V dc
  • Over-current limit trip (Latching)
  • Adjustable ramp control 0-30 seconds
  • Pre-selectable or automatic Phase Angle to Burst Fire control
  • Switchable Phase reversal
  • Selectable Inductive or Resistive load setting
  • Selectable timing delay for use as a twelve pulse driver
  • High immunity to mains voltage distortions
  • Complete with integral supply transformer.
  • Closed loop current or voltage control via optional remote programmer and signal conditioning board

Additional information

Download the technical document for this product below.


Download Technical Datasheet
Weight 1 kg
Technical Support
customer service United Automation

Need Help Deciding?

If you are unsure which item to purchase or would like additional information then please get in touch.

Get More from Your Power Control

Product Design / Prototyping

We have developed a systematic approach to designing and prototyping your product from start to finish.

electronic card 2
electronic card 2

Recently Viewed Items