6kW Soft-Start Controllers

more views

Specification

6kW Soft-Start Controllers
  • A86391 Infresco P-6kW (PIR Soft Start)
  • A86392 Infresco S-6kW (remote switch soft-start)
  • A86390 Infresco T-6kW (Push button timer)
  • A86397 Infresco TR Controller
£0.00
(Please select an Option* below to view price.)

Weight: 0.1500

Shipping: Calculated at checkout

* Required Fields

£0.00
Infresco P-6kW (PIR Soft Start)

The infresco-P 6kW is part of a family of controllers designed to provide energy saving efficiencies when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius.

The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Installation is simple and once installed is relatively maintenance free.

PRODUCT FEATURES
• Significant energy saving - provides heat only when people are present
• Extends lamp Life
• Temperature monitor – lamps inhibited when ambient temperature exceeds set point
• Soft-start/zero-voltage switch-off
• Low-cost
• Easy to install

Infresco S-6kw (Remote Switch Soft-Start)

The Infresco-S 6kW is part of a family of controllers designed to provide energy saving efficiencies when used with Quartz Infrared Halogen Lamps or other heating and lighting products. The ‘S’ model softstarts the load either when power is applied to the unit or by the use of a remote switch. The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. Installation of the unit is simple and once installed is relatively maintenance-free. The soft start will be initialised each time power is supplied to the unit, additionally, a remote switch can be added using terminals (INPUT COM) on the PCB. (in normal mode the terminals are fittedwith a link, this will need to be removed and switch wires fitted). If these terminals are used an addition gland will be required to maintain the units IP rating (Additional Gland Supplied).

PRODUCT FEATURES
• Extends Lamp Life
• Soft-start/zero-voltage switch-off
• Low-cost
• Easy to install

Infresco T-6kW (Push-Button Timer)

The infresco-T 6kW is part of a family of controllers designed to provide energy saving efficiencies when used with quartz infrared halogen lamps or other heating and lighting products. The ‘T’ model switches the lamps on for a predetermined time period of between 1 and 30 minutes. The microcontroller-based unit incorporates zero-voltage switching and a softstart function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. Installation of the unit is simple and once installed is relatively maintenance-free.

PRODUCT FEATURES
• Energy saving – provides heat for a pre-determined time period.
• Extends lamp Life.
• Control up to 4 x 1500W lamps.
• Soft-start/zero-voltage switch-off.
• Low-cost.
• Easy to install.

APPLICATIONS


• patio areas
• smoking shelters
• restaurants
• warehouses
• workshops
• garden lighting