4kW Soft-Start Controllers

more views

Specification

View FileX20020 Infresco-P-4kW Manual
View FileX20034 - 4kW Infresco-S
View FileX20019 Infresco-T-4kW
View FileX20106
4kW Soft-Start Controllers
  • A86372 Infresco p-4kw (PIR Soft Start)
  • A86374 Infresco S-4kW (remote switch soft start)
  • A86370 Infresco T-4kW (1-30 min push button timer)
  • A86601 Infresco CT 4kW Soft Start Controller
£0.00
(Please select an Option* below to view price.)

Weight: 0.1500

Shipping: Calculated at checkout

* Required Fields

£0.00
Infresco S-4kW (Remote Switch Soft-Start)

The Infresco-S 4kW is part of a family of controllers designed to provide energy saving efficiencies, when used with Quartz Infrared Halogen Lamps or other heating and lighting products. The ‘S’ model softstarts the load either when power is applied to the unit or by the use of a remote switch. The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. Installation of the unit is simple and once installed is relatively maintenance-free. The soft start will be initialised each time power is supplied to the unit, additionally, a remote switch can be added using terminals (INPUT COM) on the PCB. (in normal mode the terminals are fittedwith a link, this will need to be removed and switch wires fitted). If these terminals are used an addition gland will be required to maintain the units IP rating (Additional Gland Supplied).

PRODUCT FEATURES

• Extends Lamp Life
• Soft-start/zero-voltage switch-off
• Low-cost
• Easy to install

Infresco T-4kW (1-30min Push-Button Timer)

The infresco-T 4kW is part of a family of controllers it is designed to provide energy saving efficiencies, when used with Quartz Infrared Halogen Lamps. The unit has a built in Push Button which switches on the power to the lamps for timed periods up to 40 minutes.

The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. When the Push Button is pressed the lamps are switched on for a time period of between 1 and 40 minutes. This time period can be set by adjusting a potentiometer on the circuit board. Installation is simple and once installed is relatively maintenance free.

PRODUCT FEATURES

• Significant energy saving - provides heat only when people are present
• Extends lamp Life
• Temperature monitor – lamps inhibited when ambient temperature exceeds set point
• Soft-start/zero-voltage switch-off
• Low-cost
• Easy to install

Infresco T-4kW (1-30min Push-Button Timer)

The infresco-T 4kW is part of a family of controllers it is designed to provide energy saving efficiencies, when used with Quartz Infrared Halogen Lamps. The unit has a built in Push Button which switches on the power to the lamps for timed periods up to 40 minutes.

The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. When the Push Button is pressed the lamps are switched on for a time period of between 1 and 40 minutes. This time period can be set by adjusting a potentiometer on the circuit board. Installation is simple and once installed is relatively maintenance free.

PRODUCT FEATURES

• Significant energy saving - provides heat only when people are present
• Extends lamp Life
• Temperature monitor – lamps inhibited when ambient temperature exceeds set point
• Soft-start/zero-voltage switch-off
• Low-cost
• Easy to install

Infresco-CT 4kW

The Infresco-CT 4kW is part of a family of controllers designed to provide energy saving efficiencies, when used with quartz infrared halogen lamps or other heating and lighting loads. The ‘CT’ model switches the load on for a pre-determined time period, of between 1 and 60 minutes. The controller output can also be switched on and off manually, by touching the front panel of the unit. The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate high initial inrush current which can potentially increase lamp life by as much as 30%. Installation of the unit is simple and once installed is relatively maintenance-free.

PRODUCT FEATURES


• Energy saving – provides heat for a pre-determined time period.
• Extends lamp Life
• Soft-start/Soft-Stop
• Low-cost
• Easy to install

APPLICATIONS


• patio areas
• smoking shelters
• restaurants
• warehouses
• workshops
• garden lighting