United Automation Southport Business Park, Wight Moss Way, Southport, PR8 4HQ Telephone: 01704 516500 Fax: 01704 516501 Email: info@united-automation.com
Search the Website
Welcome to United Automation You are here: Home > Applications >
These fully adjustable, mains controlled variable regulators are designed to withstand four times full load current on switch on.
These mains controlled variable regulators are QVRs with a built in RFI suppression network and have a plug in line and load terminal block.
This power regulator is pre-set to give three positions of control (low, medium and high) and an off position.
This power regulator is a QLC with a built in RFI suppression network and plug in line and load terminal connection block.
The CSR chip is a thick film triac and phase angle firing circuit built into one package.
The CSR power regulator is a CSR chip with a combined control potentiometer, available in two main types.
The PSR is a full wave AC power control module with in built triac, snubber network and firing circuit.
The TPSR is a full wave AC power control module, capable of giving proportional control from a thermistor
These are manually controlled variable AC power regulators with integral heatsink and internal semiconductor fusing.
This universal firing module is designed to accept a wide range of common voltage or current control signals.
This universal firing module is designed to accept a wide range of common voltage or current control signals, suitable for driving most semiconductor devices in single and phase to phase applications.
This power module features an integral triac to enable control of resistive and inductive loads up to 25A, when fixed to a suitable heatsink.
This compact power module is capable of controlling mains driven loads up to 25A, when mounted on a suitable heatsink.
This compact manual driver is designed to trigger triacs in 110v to 230v applications. The firing circuit is easily wired to a remote triac via a three way terminal block.
Semiconductor fuses are fitted as standard, the unit is naturally cooled and complete with mounting feet.
These items can replace conventional semiconductor fuses and are available as single and double pole models with high short-circuit capacity.
Designed to compliment the UAL phase angle three phase thyristor control assemblies, universal mounting for simple installation, naturally cooled light weight construction.
Designed to compliment the UAL mains phase-angle power controler range, simple two hole mounting lugs for simple installation,fully encapsulated and naturally colled.
Graduated dial with 'min' and 'max' markings for use the QVR range of products.
Four position dial marked as 0, 1, 2 and 3 for use with the QLC range of products.
Dow Corning 340 type heat conducting paste to ensure good heat transfer between mating surfaces.
© United Automation Ltd.
|
Website designed by Ph.Creative | CMS powered by PhUse™