Burst Firing Circuits and Power Modules

Home
Firing Circuits/Trigger Modules
Burst Firing Circuits & Power Modules

Burst Firing Circuits & Power Modules

This range of single phase & three phase firing circuits & power modules all operate in Burst-Fire or Logic mode, suitable for most resistive loads. Phase timing problems are eliminated. The burst firing circuit provides trigger pulses coincident with the mains polarity crossover, ensuring complete sine wave cycles are passed through the resistive load. This inhibits RFI. Suitable for virtually all resistance heating loads including ovens, furnaces, hot plates, extruders, molders & space heaters.

$102.96 BM-1

This burst fire control module incorporates the unique mono-linkä, Gate to Gate, firing feature, which uses single path hard firing for each phase thyristor pair, eliminating cathode firing connections. The zero...

Compare
$132.85 BM-2

This burst fire control module incorporates the unique mono-linkä, Gate to Gate, firing feature, which uses single path hard firing for each phase thyristor pair, eliminating cathode firing connections. The zero...

Compare
$161.08 BM-3

This burst fire control module incorporates the unique mono-linkä, Gate to Gate, firing feature, which uses single path hard firing for each phase thyristor pair, eliminating cathode firing connections. The zero...

Compare
$161.91 BMT3A

This microprocessor based dual range temperature control module incorporates the unique mono-linkä - Gate to Gate firing feature which uses single path hard firing for each phase thyristor pair eliminating cathode...

Compare
$86.02 FC11BL

This single phase burst firing module operates on a one second nominal time base. The zero triggered output has a variable on/off ratio, which is proportional to the manual control signal or dc input demand signal. Phase...

Compare
$114.58 FC11BL/2

This single phase firing module has its own built in power device, reducing wiring and fixing connections. Ideal for heating loads up to 25 Amps, when fitted onto a suitable heatsink. Burst firing operates on a 1second...

Compare
$57.30 LTM-Z2

This logic driven trigger module gives zero crossing opto-isolated control to convert on/off signals into power, via inverse parallel thyristor or triac. It can accept a wide range of signals from TTL, CMOS devices,...

Compare
$62.28 LTM-Z4

This logic driven trigger module gives zero crossing opto-isolated control to convert on/off signals into power, via inverse parallel thyristor or triac. It can accept a wide range of signals from TTL, CMOS devices,...

Compare